Fine Pole Permanent Chuck 150mm X 100mm

These fine pole permanent chucks are ideal for grinding different kinds of pieces and give good results with small, narrow pieces.

They are completely coolant-tight and oil-tight and can operate totally submerged in these liquids.

Magnetisation is carried out via a lever, or 2 levers with chuck lengths over 600mm. The shaft on smaller chucks does not project from the chuck and can be handled using the lever provided.

The clamps used to hold the chuck are supplied separately.

The fine pole chuck has a narrow pole spacing: 6-1.5-2.1.6 (6mm of steel and 1.5mm of brass 2 of steel and 1.5mm of brass)

This pole configuration provided greater holding power for small or narrow pieces (less than 3mm) and for larger pieces.